Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1/4-inch Mono 2 Conductor Jack with Nut, Washer and 0.205-inch Faston Terminals, Open Circuit
Model: FA11
Product Info
Tech Specs
Littel-Jax phone jacks mate with standard commercial phone plugs and are available with .25 inch inside diameter bushings.
- Adapter Type - Audio
- Life: Commercial Jacks - 10,000 insertion/withdrawal cycles, minimum. Military Jacks - 20,000 insertions/withdrawals, minimum
- Mechanical Shock: Military Jacks - Per MIL-STD 202, method 213, Test Condition H (75g)
- Vibration: Military Jacks - Per MIL-STD-202, method 213, (10-55 Hz)
- Contact Resistance: Commercial Jacks - .030 ohms maximum (initial), .050 ohms maximum (after humidity, durability exposure). Per MIL-STD-202E. Military Jacks - .010 ohms maximum (initial), .020 ohms maximum (after life), .10 ohms maximum (after salt spray)
- Insulation Resistance: Commercial Jacks - 10,000 M(omega) minimum (initial), 1,000 M(omega) minimum (after humidity). Military Jacks - 10,000 M(omega) minimum (initial), 1,000 M(omega) minimum (after humidity, durability exposure)
- Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC
- Thermal Range: Commercial Jacks; -55°C to +85°C (non-operating); -20°C to +65°C (operating). Military Jacks; -55°C to +85°C (non-operating); -40°C to +65°C (operating)
- Thermal Shock: Commercial Jacks - Per MIL-STD 202, method 107. Military Jacks - Per MIL-STD 202, method 107
- Humidity: Commercial Jacks - Per MIL-STD 202, method 106. Military Jacks - 0% to 95% operating and non-operating
- Salt Spray: Commercial Jacks - Per MIL-STD 202, method 101. Military Jacks - Per MIL-STD 202, method 101 (48 hours)
- Moisture Resistance: Military Jacks - Per MIL-STD 202, method 106 (240 hours)
- Material-Mounting Bushing: Nickel-plated copper alloy
- Material-Insulation: Rigid plastic
- Material-Springs: Special copper alloy. Integral contacts are standard in the isolated switching circuits; fine silver contacts in C12A switching circuit
- Material-Sleeve Terminal: Copper alloy
- Material-Hardware: Supplied with one Number P10001 copper alloy nickel-plated hex nut, and one Number S1022 steel nickel-plated washer - except copper alloy nickel-plated
- AC Voltage: 500 Volts
- Current Draw: 1 Amps
- DC Voltage: 25 Volts
Request Quote
Suggested Products
by
Liberty AV Solutions
by
Liberty AV Solutions
Thank you!
Someone will be in touch with you shortly.
Contact ECC
close
ECC
6501 North 70th Street
Lincoln, NE 68507
USA
(402) 466-8274
https://eccoinc.com
Contact in regards to this product:
Switchcraft, Inc.
Model: FA11
Request more information from a dealer near you
close
Request more information from a dealer near you