Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
.jpg)
Request Quote
All Products
8-channel 500W Protea Equipped Network DSP Amplifier
Series: pema Series
Model: pema8250
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
Product Info
Tech Specs
Related Products
Documents
Pema sets new industry benchmark for value-engineered zone sound systems. By seamlessly merging Ashly’s powerful, open-architecture DSP functionality with Ashly’s renowned amplifier performance inside two-rack space unit, pema lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming. Four and eight amplifier channel versions are available at both 125 and 250 Watts per channel. Full 96kHz performance is available on 32-bit SHARC processors for utterly transparent audio.
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Ambient noise compensation
- Automatic feedback suppression
- 8-in x 8-out sophisticated matrix mixing
- Dual RCA and balanced euroblock inputs
- Built-in pink/white noise and sine wave generator
- Gain sharing automatic microphone mixing (Automixer)
- 125 or 250 watts per channel, Low-Z and constant voltage Models (70V and 100V)
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Transformer Option - Yes
- Rackmountable - Yes
- Low Voltage Control - Yes
- Must be Level - Yes
- Dante Enabled - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Low Voltage Control: Yes
- Rackmountable: Yes
- Transformer Option: Yes
- Thermal Dissipation (1/3 Power Sine Wave): 375 BTU/Hour
- Must be Level: Yes
- Warranty (Length/Type): 5 Years Limited
- AC Voltage: 120 Volts
- Active Power: 360 Watt
- Current Draw: 4.80 Amps
- Depth: 15.50 in
- Height: 3.50 in
- Width: 19 in
- Product Weight: 21 lbs
- Mount Type: Rack
- 70V Taps: 250 Watt
- 100V Taps: 250 Watt
- Certifications: FCC, CE
- Minimum Frequency Response (Bandwidth): 20 Hz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Signal to Noise Ratio: 105 dB
- Number of Channels: 8
- Number of Inputs: 8
- Number of Outputs: 8
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- Number of Watts Per Channel: 500 Watt
- Rack Units (Height): 2
- Operating Temperature (Maximum): 120.20 F
- Operating Temperature (Minimum): 39.20 F
Power Amplifier
792 kb
- Data Sheet
Power Amplifier
2138 kb
- Other
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact ECC
close
ECC
6501 North 70th Street
Lincoln, NE 68507
USA
(402) 466-8274
https://eccoinc.com
Contact in regards to this product:
Ashly Audio, Inc.
Model: pema8250
Request more information from a dealer near you
close
Request more information from a dealer near you