Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8-channel 500W Class D Network Professional DSP Power Amplifier
Series: NE
Model: ne8250
- Eight channel amplifier
- Ethernet control is standard
- Low-Z, 25V, 70V and 100V models
- Extensive DSP available
- Easy and intuitive user interface
Product Info
Tech Specs
Related Products
Documents
Accessories
The ne8250 is a eight-channel DSP amplifier with output power at 250W are available to fill wide variety of low impedance, 25V, 70V and 100V performance installation or constant voltage applications. NE series amplifiers are offered two ways, standard input with euroblock connectors and pe (Protea Enabled) with euroblock input connectors and world renowned Protea DSP signal processing. The DSP signal processing library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic, Parametric, Notch and shelving equalization, high-, low- and all-pass filters (HPF/LPF/APF) with up to 48dB/octave slopes, delay, compressor/limiter, gate, ducking, auto-leveler, gain and signal generators (sinewave, white and pink noise). Full matrix mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global parameters of an entire amplifier’s control surface and DSP section.
- Eight channel amplifier
- Ethernet control is standard
- Low-Z, 25V, 70V and 100V models
- Extensive DSP available
- Easy and intuitive user interface
- Extensive protection circuitry
- Level attenuators for each channel
- Power switch can be disabled by software
- 4-step signal level and clip LEDs
- Optional CobraNet, EtherSound, AES/ EBU, mic preamps
- Amplifier Type - Power Amplifier
- Warranty - Yes
- ROHS Compliant - Yes
- Rackmountable - Yes
- Low Voltage Control - Yes
- Must be Level - Yes
- Dante Enabled - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Low Voltage Control: Yes
- Must be Level: Yes
- Rackmountable: Yes
- ROHS Compliant: Yes
- Maximum Input Level: +21 dBu
- Damping Factor (8 ohms): >250
- Output Circuitry: Class D
- Connectors (each channel): Input: Euroblock; Output: Euroblock
- Front Controls: AC Power Switch, Individual input attenuators
- Cooling: Temperature dependent speed-controlled fan (Front in, Side out)
- Front indicators (LED color): Power (Blue), Standby (Yellow), Protect (Red), Disable (Yellow), Com (Green), Bridge (Green), Signal Level -18dB, -12dB (Green), -6dB (Yellow), Clip (Red), Temp (Yellow)
- Rear Controls: Ethernet 10/100, Channel bridge switch (Low-Z only), Remote standby, Preset recall (4), Remote Level (4), Remote Data
- Warranty (Length/Type): 5 Years Limited
- AC Voltage: 120 Volts
- Active Power: 360 Watt
- Current Draw: 4.80 Amps
- Depth: 15.50 in
- Height: 3.50 in
- Width: 19 in
- Shipping Weight: 26 lbs
- Product Weight: 21 lbs
- Impedance: 20000 ohm
- Mount Type: Rack
- Certifications: CE, FCC
- Minimum Frequency Response (Bandwidth): 20 Hz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Signal to Noise Ratio: 105 dB
- Number of Channels: 8
- Rack Units (Height): 2
- Operating Temperature (Maximum): 120.20 F
- Operating Temperature (Minimum): 39.20 F
ne4250
- 4-channel 500W Class D Network Professional Power Amplifier
ne8250.pdf
437 kb
- Data Sheet
Gym Application with DSP + Mic inputs
227 kb
- Other
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact ECC
close
ECC
6501 North 70th Street
Lincoln, NE 68507
USA
(402) 466-8274
https://eccoinc.com
Contact in regards to this product:
Ashly Audio, Inc.
Model: ne8250
Request more information from a dealer near you
close
Request more information from a dealer near you